Candy MODELS FOR UNDER-COUNTER FITTING Manual de usuario descargar pdf (Pagina 8)

NOTE: To minimize vibration noise, the drain line

must be routed so that it does not touch adjacent

Drain Hose

cOntWi!tiOn

(Recommended Method)

/lb

Rubber connector (Air-gap to disposer)

Part No. 674381

Air.gap Kit (if local code requires it)

Part No. 300096

Waste Tee (Part No. 675149)

(Entry MUST be above trap)

I I

20” Minimum

SINK AT LEFT

SINK AT RIGHT

Push your dishwasher into place, feeding the drain hose

corrugated (ribbed) section of the drain hose to shorten

through the

11/2",

or larger, hole you have already cut

it, coil and tape the extra hose under the sink.

for it.

Keep pulling hose out through hole while pushing

dishwasher into position. Connect drain hose and secure

with necessary size (1” or 15/16”) hose clamp from parts

NOTE: Be sure to periodically clean the drain air-gap line.

Refer to the instructions packed with the drain air-gap

for details.

bag.

When connecting drain hose to Air-Gap, the hose end

will have to be cut. (See Inset) DO NOT cut the

CAUTION: Be sure to remove knock out plug from

disposer inlet before attaching drain hose.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Sin comentarios

Candy MODELS FOR UNDER-COUNTER FITTING Manual de usuario Pagina 8